GeoMedia Kommunal Kopplung

<br\> <br\>

Dieser Bereich beschreibt das Einrichten der Kopplung von GeoMedia Kommunal und GeoMedia Smart Client. Dabei stellt SmartClient die primäre Arbeitumgebung dar und die Funktionalitäten der einzelnen Fachanwendungen von GeoMeida Kommunal sind über sog. Registerkarten unterhalb der Menüleiste in die SmartClient Oberfläche integriert. Diese Variante von GeoMedia Kommunal wird als reines Auskunftssystem zum Einsatz gebracht - das Erfassen oder Pflegen von Daten ist damit nicht möglich!

Einrichten der Kopplung zwischen GeoMedia Kommunal und GeoMedia Smart Client

Note: Die in der folge beschriebenen Schritte werden abwechslend in der Adminer-Mappe bzw. der Projekt-Mappe und im GeoMeida Smart Client Administration ausgeführt!

Section	Description
GeoMedia Kommunal Adminer	Type in a new project name. Is base project box is checked by default, that means your project is a stand-alone project. If the project is part of a merged one, then uncheck the box.
Coordinate System	Project CS: Defines the project coordinate system. It has to be a projected coordinate system, that means your coordinates are in metrical unit. So for example if your data is stored in the database with WGS84 coordinates, you have to choose here a projected coordinate system (for exmaple UTM) and set the coordinate system in the Data Source options in Single Feature to WGS84. Display CS: Defines the display coordinate system for the GeoMedia Smart Client; this may vary from the Project CS and is independent of the data coordinate system. Click Add CS to define a new coordinate system. Make sure to have a corresponding CSF file (GeoMedia coordinate system file) available. This list of coordinate systems will be available whenever creating a new project or editing an existing one. It is not necessarily the list of coordinate systems that is available to the client. <br\> Note: If the EPSG code is set, be sure it's the correct one. Click Datei:Edit cs.png to edit the selected coordinate system.
Project Area	Define the minimum bounding rectangle of your project by inserting the maximum extent of your data. East(Min): Most western point of you bounding box or X-value of the lower-left corner North(Min): Most southern point of your bounding box or Y-value of the lower-left corner East(Max): Most eastern point of your bounding box or X-value of the upper-right corner North(Max): Most northern point of your bounding box or Y-value of the upper-right corner

Click Save to save your settings.

Click Delete to delete the project.

Note: The sections marked with an asterisk (*) are mandatory for setting up a new project. If the fields are empty, the creation of a new project will fail with an error message.

<br\> <br\> To the top

Report erstellen

Note: Reading this section will help you to create new projects. The spatial extended coordinate systems are defined.

Select New Project in the quick list section Project to open the dialog box for setting up a new project.

Datei:Project.png

The form contains boxes for entering all necessary project settings (name, project area, coordinate system, and so on). It is divided into four sections, which are explained in the following table.

Bewertung

Note: Here you can modify all previously defined settings for the selected project.

There are two ways to get the form for selecting a project:

• Use the quick link section Project and click Projects.
• Navigate to the basic workflow (see following figure) and select the entry Projects.

Datei:Basic workflow.png

You will be directed to a list with all projects already entered into the underlying database. By double clicking on a specific project, you will be forwarded to the data sheet with all information to the current project settings and the possibility to edit them. If the list of projects gets too long, you may use filtering to quickly find the needed project(s). To use filtering, expand the filter by clicking on in the upper-right corner of the header.

Filter: The filter looks as follows

Datei:Project fliter.png

• Type in the name of the project in the section Name.
  Note: You will not need a wild-card if you want to search, for example, for projects with specific letters.
• By clicking Apply Filter you execeute the filter. As a result, you will see only the filtered projects in the list.
• Click Reset Filter to cancel the filter.

Additionally, you may sort the projects by name. Click on the list header Name to sort alphabetically. If you want to reset the sorting, you have to click Datei:Reset sorting.png.

<br\> <br\> To the top